How to choose oscilloscope reasonably as the price difference of oscilloscope nearly 50 times between low-grade with high-grade?
The relationship between the bandwidth selection and the highest signal frequency to be measured is needed if accurate measurements are required. Let’s check below example, there is one pulse signal with 50 MHZ, to ensure scope of signal and accuracy of rising delay, the bandwidth of oscilloscope should be 3-5 times of measured signal’s frequency and the accurate measurement should be 8-10 times or more.
Sine wave: as usual, need more than 5 sampling sites during one period as the waveform will be more close to the actual one with more sampling sites.
Pulse wave: rising delay should be more than 5 sampling sites.
Accurate measurement rising delay should be more than 10 sampling sites.
3. Record length: record length=sample*scanning speed*10, it could also be called waveform observation time.
4. Trigger function: ensure that the measured signal can be captured and synchronized to facilitate the observation and analysis of the measured waveform
Trigger methods: automatic trigger, normal trigger and single trigger
Two kinds of trigger function
X-Y display and X-Y+X-T and Y-T display are provided, can also carry on the vernier measurement makes it specially suitable for vector diagram analysis of digital communication signals.
5. Record and print signal
1) Can be stored in a test line on a floppy and hard disk, and can be read on a PC. Some digital oscilloscopes are equipped with built-in, convenient to print and analyze long time signal;
2) Some oscilloscopes also provide VGA interface.