New High Performance Digital LCR Meter U2832
U2832 Series LCR Meter is a new generation of impedance test equipment with high accuracy, wide measurement range and six digits resolution. Being possessed with test frequency up to 200kHz, test voltage of 10mV-2V, it can meet all requirements for measuring components and materials and provide guarantees for production line quality assurance, incoming inspection and laboratory precision measurements.
Digital lcr meter 100Hz 1KHz 10KHz high precision lcr meter
10khz resistance lcr meter
1.Base on single micro-processor, using advanced 5 ports techniques and micro-processor corrected errors.
2.Impact protection, locking range and special zeroing function.
3.Easy operation, high stability, suitable for testing production field.
Measuring parameters:L ,C, R ,Q, D
Test signal level:0.3Vrms±10% (Empty) @ 1 KHz
Testing speed:4-6 times per second
Humidity:less than 85% RH
Voltage:AC198V~242V Frequency: 50Hz±5%
Power consumption : less than 30W
Volume and weight:
Weigh: about 3.5Kg
LCR meter 100K Practical high precision benchtop precision bridge/100K high precision desktop bridge table digital bridge meter
This series LCR digital bridges are high-precision component parameter analyzers making use of automatic balancing bridge principle, featuring 10 Hz~ 1 MHz testing bandwidth, continuously adjustable frequency, 0.05% of basic measuring accuracy, automatic level control, list scanning and position counting, which can provide accurate and complete measurement and analysis for most components and materials, so it is wildly used in product R&D, component incoming inspection and online product sorting.