How to place the order of DS6600 series DDS Signal generator?
WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
6. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
DS6600 series DDS signal generator can generate sine wave, square wave, triangle wave, pulse wave, and arbitrary wave etc. The frequence will be upto 40MHz. And it has duty-cycle correction, amplitude modulation function and frequency sweep function, etc. it can show output signal, amplitude and frequency in the same time. This series has amplitude frequency characteristics, and the appearance is very delicate and beautiful. It can be applied in factories, schools, research institutes and laboratory
What is your delivery time of your DDS Signal generator?
A: Mass Production For Wholesale Order: Normally it's 15 ~ 30 Days. During the busy months it will be 45 Days.
B: Small Order normally in 7 days after payment.
Please check with us if order is confirmed.
DS2900 60MHz digital control dual channel DDS function Arbitrary waveform signal generator
DS2900 digital control dual channel DDS function Arbitrary waveform signal generator, with a small size, easy to carry, good stability and other characteristics, the two channels are completely independent, all parameters can be achieved at the same time; can output function signal, pulse signal, Signals, digital signals and custom arbitrary waveform signals, and has a counter and measurement signal function; the use of large-scale FPGA integrated circuits, high-speed MCU microprocessors and high-precision oscillator as the basis of internal circuits, the signal more stable. SMT technology can greatly improve the anti-interference and life of the instrument; electronic engineers, electronic laboratories, research institutes and electronic enthusiasts worthy of the equipment.
1,Adopt 320*240 2.4" TFT color LCD display, simultaneously display parameters of CH1 and CH2,Ability to reproduce patterns of custom waveform.
2,Using DDS direct digital synthesis technology to generate precise, stable and low distortion output signal.
3,Max. output frequency(sine wave) up to 15MHz/30MHz/40MHz/50MHz/60MHz(optional), 266MSa/s sampling rate and 14bits vertical resolution.
4,Completely independent dual channels output, synchronizing operation and adjustable phase difference.
5,Great improvement for square wave performance, square frequency range up to15MHzwith no distortion.
6,60 groups of arbitrary wave storage function, memory depth of each group is2048*14bits.
7,High frequency accuracy and resolution: frequency accuracy up to 10^(-6) magnitude, total range frequency resolution is 0.01uHz.
8,High amplitude resolution: the minimum amplitude resolution can reach 1mV, amplitude range is 0Vpp~20Vpp.
9,Duty-cycle of each channel can be adjusted independently0.1%-99.9%, the adjusting resolution is 0.1%.
10,Pulse pulse width and pulse cycle time is precisely adjustable, adjust the range of 30nS-4000S
11,Scanning features: linear sweep and logarithmic sweep functions; 0.1s-999.9s sweep time; sorward, backward and roundtrip sweep directions.
12,With pulse trains burst output function, allow the unit output 1~1048575 arbitrary pulse trains.
13,Measurement functions: can measure signal frequency, cycle, positive/negative pulse width and duty cycle; 1Hz~100MHz frequency range.
14,-9.99V~9.99V DC offset range, offset resolution: 0.01V.
15,With digital signal output function, CMOS output range 0~10V.
16,Storage feature: can store 100 groups of parameters set by the user and extract at any time.
17,Counter function: with DC and AC coupling modes.
18,Arbitrary wave editing function: user can edit arbitrary wave on PC and then download to
output from the instrument.
19,Communication function: the PC can be used to control the instrument.
20,With output short-circuit protection: all signal output can work 60s under load short-circuit condition.
1 * DDS Signal Source Generator
1 * USB Cable
1 * CD User Manual
1 * Power Adapter
2 * BNC Clips Cable
1 * Dual BNC Straight Line
High frequency precision up to 10-6 orders of magnitude.
Full range of 0.01μHz frequency resolution.
Minimum amplitude resolution can be up to 1mV.
Amplitude range is 0Vpp~20Vpp.
Duty cycle of each channel can be adjusted separately. Precision can be 0.1%.
Sine & Square & Triangle Wave: 0~15MHz/30MHz/60MHz(Optional)
Pulse & Arbitrary & TTL Digital Signal Wave: 0~6MHz
Square Rise Time: ≤25nS/≤20nS/≤15nS
Pulse Width Adjustment Range: 150nS-4000S/60nS-4000S/30nS-4000S
With pulse trains burst output function, allow the unit output 1~1048575 arbitrary pulse trains.
Frequency Accuracy: ±20ppm
Frequency Stability: ±1ppm/3h
9kHz~3.2GHz External IQ Modulation RF Signal Generator
3000X series of signal generators have a frequency range of 9 kHz to 2.1 GHz/3.2 GHz. They provide normal analog modulation such as AM, FM, and PM. They also provide pulse modulation and pulse train generator.
In addition, when used with baseband generator such as SDG6000X, They can generate IQ modulated signals. With their high accuracy and pure outputs, the SSG3000X series are the right choice for R&D, education, and manufacturing.
3000X Signal Generator
Signal Generator 9kHz~3.2GHz
3032X ; 3032X-IQE
Signal Generator 9kHz~2.1GHz
3021X ; 3021X-IQE
quick start, an USB cable, calibration certificate, power cord
pulse train generator
rack mount kit
Upgrade 2.1 GHz to 3.2 GHz
Upgrade 2.1 GHz to 3.2 GHz (with external IQ)
Function & Benefits
5 inch TFT capacitive touch screen, mouse and keyboard supported
Frequency up to 3.2 GHz
0.01 Hz frequency setting resolution
Level output from -110 dBm to +13 dBm
Maximum level up to +20 dBm (typ.)
Phase Noise: -110 dBc/ Hz @ 1GHz , 20kHz offset (typ.)
Level accuracy ≤0.7 dB (typ.)
External IQ modulation with SDG6000X as the baseband IQ signal
USB-power meter measurement
Web browser remote control on PC and mobile terminals
Standard interface: USB Host, USB Device (USB TMC),LAN (VXI-11, Socket, Telnet)
Optional interface: GPIB