Digital Dual channel DDS Function Signal Generator MHS-2300A 5MHZ
Introduction of the instrument:
The instrument uses a large-scale high-speed FPGA + ARM microprocessor, display with 2.4-inch TFT color LCD display. The instrument has dual DDS signal output waveform output has sine, square, triangle, pulse, linear frequency sweep, logarithmic frequency scanning signal generating function, and can achieve arbitrary waveform generation function of the signal, the highest frequency sinusoidal signal to 5MHz, frequency resolution up 10uHz. In addition TTL sync input waveform output and SYNC is the same terminal, take advantage of this feature allows multiple signal generator phase synchronization, enabling multi-channel signal generator functions. Measurement, the instrument has a frequency measurement, period measurement, positive pulse, negative pulse width measurement and counting functions. This instrument is an electronics engineer, electronics laboratories, production lines and teaching, research and the ideal test, measurement equipment.
The main features:
1 direct digital synthesis (DDS) technology , FPGA design , ultra-low power consumption ;
2 uses a single 5V power adapter , if the user has moved the power , but also to facilitate the achievement of field work ;
3 sine wave signal output frequency is 10uHz ~ 5MHz;
4 square wave, pulse wave , triangle wave output frequency is 10uHz ~ 1MHz;
5 contains an internal precision attenuator circuit, the small-signal output is more accurate ;
6 waveform frequency resolution up to 10uHz;
7 with an arbitrary starting point, the end of the frequency setting , linear and logarithmic sweep sweep function ;
8 has a frequency measurement, period measurement , pulse width measurement and counting positive and negative features ;
9 has a control function of the number of output pulses can be controlled by the output pulses of 1 to 1,048,575 according to the setting function
10 All parametric equalizer can be done by an internal calibration procedure ;
11 interface using interactive menus , support Chinese and English language options , allowing users a glance ;
12 chassis compact shape, easy to carry , comfortable and flexible key operation .
13 can communicate with the PC , use the PC to control the instrument , and the ability to edit arbitrary waveforms on a PC to download to the instrument output waveform.
Packaging & Shipping
Packaging material: Carton/Wooden case with foam inside.
A. 3-5 workdays shipping from China by Air/Express(DHL,FedEx,UPS,EMS etc.)
B. 3-5 workdays shipping from UK Warehouse to European union countries.No need to pay for customs duties and VAT.
C. 25-30 workdays shipping from China to Russian customers. No need to pay for customs duties and VAT.
D. We can arrange shipment by sea. Minium CBM requirement : 1 CBM
Sale a and after-sale Service:
1.We provide you the friendly English User manual or operating videos for free.
2.24 hours technical support by email or calling.
3.Warranty: 1 year free, 2-3 years cost price and free technical support always.
4.Free training to make sure you master the operating of our products.
5. OEM/ODM accept . But the MOQ of OEM/ODM is 100 sets.
China function generator 2mhz signal generator good for lab testing
2mhz Signal generator function generator
Frequency of the mode: 0.1Hz---2MHz/ 5MHz/ 10MHz/15MHz
Output waveform: Sine, Triangle, Square, ramp ±Pulse
TTL/CMOS and OUTPUT synchronous output
Less than 1% distortion at 10Hz-- 100 KHz
Output waveforms :Sine, triangle,square, positive and negative pulse, positive and negative ramp
Output impedance :50ohm±10%
Amplitude :Not less than 50Vp-p (open circuit)
DC voltage:0~±10V continuously adjustable
Rising edge of square :
Less than 100ns 0.1Hz---2MHz
Less than 50ns 0.1Hz---5MHz
Less than 35ns 0.1Hz---10MHz
Less than 35ns 0.1Hz---15MHZ
Distortion :Less than 1% at 10H-100KHz
Frequency response:0.1Hz~100MHz: ≤± 0.5dB
100 KHz-5MHz ≤±1dB (LW-1642)
100KHz~2MHz: ≤±1dB (LW1641)
Level Level: TTL low level less than 0.4V in pulse wave, high level less than 3.5V,CMOS low less tan 0.5V in pulse wave, high level 5V--14V continuously variable.
Rising time:Less than 100ns
Output voltage: -5V~0V±10
Input impedance:Not less than 1Mohm/20F
Line power:Less than 0.003%±1 digit
Weight N.W.: About 2.5Kg
AFG-2125, 2005, 2105, 2012, 2112, 2025 gwinstek Arbitration Function Generator
Product ID: AFG-2000/2100 Series
* PC Arbitrary Waveform Editing Software* 0.1Hz to 5/12/25 MHz with in 0.1Hz Resolution
* Sine, Square, Triangular, Noise and Arbitrary Waveform
* 20MSa/s Sampling Rate, 10 bit Vertical Resolution and 4k Point Memory for Arbitrary Waveform
* 1% ~ 99% adjustable duty cycle for Square Waveform
* Waveform Parameter Setting Through Numeric Keypad Entry & Knob Selection
* Amplitude, DC Offset and Other Key Setting Information Shown on the 3.5” LCD Screen Simultaneously
* AM/FM/FSK Modulation, Sweep, and Frequency Counter Functions (AFG-2100 only)
* USB Device Interface for Remote Control and Waveform Editing
The user friendly interface of AFG-2100/2000 Series allows user to set waveform parameters, including waveform type, frequency, amplitude, DC offset, modulation type, and duty cycle, through keypad entry and/or the knob selection, and display the set parameters on the 3.5” LCD screen. The AFG-2100/2000 Series is equipped with a USB Device interface for remote control and waveform editing through a PC. A waveform editing software is provided to facilitate the waveform creation on the PC. After the waveform editing is done, the user is able to download the waveform data from PC to the AFG-2100/2000 Series for signal output.
The AFG-2100/2000 Series Arbitrary Function Generator is a DDS (Direct Digital Synthesized) based signal generator designed to accommodate the Educational and Basic Industrial requirements for an accurate and affordable signal source covering the output of Sine, Square (Pulse), Ramp (Triangle), Noise and Arbitrary waveforms. The 20M Sa/s sampling rate, 10 bit vertical resolution and 4k point memory of the AFG-2100/2000 Series provide user with a flexible environment for creating the specific waveform output as needed. The 0.1Hz resolution of Sine, Square and Triangle waveforms and the 1% ~ 99% adjustable duty cycle of Square (Pulse) waveform are the remarkable features to greatly extend its application range in various fields.