Signal Generator 100MHz 2 Channel 16Bit 250MSa/s 64M Memory Arbitrary Waveform Function Generator
16Bit Resolution, 250MSa/s Sample Rate; 64M Memory Depth;
100/80/60/30/20/10MHz or 5MHz Max. Sine Output Frenquency;
16 channels digital output, together with the analog channel can rebuild the more mixed signals in daily practice
Support AM, FM, PM, ASK, FSK, PSK and PWM modulations
TCXO timebase standard, OCXO optional for ultra-high stability
7 inch, 64K true color TFT display, WVGA(800X480)
Plenty of interfaces: USB Host, USB Device, LAN
80M Frequency Counter;
1 x HDG2102B Generator
1 x Power cable
1 x USB cable
1 x BNC cable
1 x CD
5200A 25MHZ Dual-Channel Digital Signal Generator DDS Function Generator Arbitrary Waveform/Pulse Frequency Generator
The LCD display is divided into two lines: the top line shows the current frequency and the following line displays additional parameters or functions.
This instrument is of great advantage in generating signal, scanning waveform, measuring parameters, etc.
It's a great testing or measuring instrument for electronics engineer, electronic laboratory, teaching and researching.
Has a frequency measurement, period measurement, positive and negative pulse width measurement, duty cycle measurements and counting function.
With USB interface, after the connection with PC, the PC can be used to control the instrument.
Can output arbitrary waveforms and conventional function waveforms(sine/triangle/square/sawtooth wave and TTL signal).
All functions are digitally controlled, precise and stable.
Dual-channel output, can work in sync, phase difference is adjustable.
Sine Wave: 0Hz~25MHz.
Square Wave/Triangle Wave/Sawtooth Wave/Arbitrary Waveform/TTL Digital Signal Wave: 0Hz~6MHz.
Waveform Types: Sine/Triangle/Square/Lifting Sawtooth Wave, CMOS Digital Signal Wave and Arbitrary Waveform.
Waveform Length: 2048Points.
Sampling Rate: 200MSa/s.
Waveform Amplitude Resolution: 12 Bits.
The Min. Frequency Resolution: 10mHz.
Frequency Error: +/-5*10^(-6).
Frequency Stability: +/-1*10^(-6)/5 hours.
Amplitude Range(Peak to Peak): 5mVp-p~20Vp-p.
Output Impedance: 50Ω(+/-10%).
Amplitude Resolution: 1mVp-p (-20dB Attenuation); 10mVp-p (No Attenuation).
Offset Range: -120%~120% (The ratio of bias voltage and signal amplitude).
Bias Resolution: 1%.
Phase Range: 0~359°.
Phase Resolution: 1°.
Sine Wave Harmonic Arrived System: 40dBc(<1MHz); 35dBc(1MHz~20MHz).
Sine Wave Distortion: <0.8%(20Hz~20KHz).
Lifting Along Time: ≤20ns.
Duty Cycle Adjustment Range: 0.1%~99.9%.
Level Amplitude: >3Vpp.
Fan-out: >20 TTL Load.
Rise/Fall Time: ≤20ns.
Output Low Level: <0.3V.
High Level: 1V~10V.
Level Rise/Down Time: ≤20ns.
Waveform Quantity: 16.
Memory Depth/Group: 1KB/16.
Frequency Measuring Range: GATE-TIME=10S 0.1Hz - 60MHz; GATE-TIME=1S 1Hz - 60MHz; GATE-TIME=0.1S 10Hz - 60MHz; GATE-TIME=0.01S 100Hz - 60MHz.
Input Voltage Range: 0.5Vp-p~20Vp-p.
Counting Range: 0~4294967295.
Positive and Negative Pulse Width Measurement: 10ns Resolution, the Max. Measurable 10s.
Periodic Measurement: 20ns Resolution, the Max. Measurable 20s.
Duty Cycle Measurement: 0.1% Resolution, Measuring Range from 0.1%~99.9%.
Source Selection: 1. Ext. IN Input(AC Signal) ; 2. TTL-IN Input(Digital Signal).
Interface Mode: Using USB to Serial Interface.
Communication Rate: 57600bps.
Protocol: Using the Command Line, the Agreement Public.
Power Supply: US Plug / EU Plug (Optional); Type: DC12V±0.5V..
AFG-2125, 2005, 2105, 2012, 2112, 2025 gwinstek Arbitration Function Generator
Product ID: AFG-2000/2100 Series
* PC Arbitrary Waveform Editing Software* 0.1Hz to 5/12/25 MHz with in 0.1Hz Resolution
* Sine, Square, Triangular, Noise and Arbitrary Waveform
* 20MSa/s Sampling Rate, 10 bit Vertical Resolution and 4k Point Memory for Arbitrary Waveform
* 1% ~ 99% adjustable duty cycle for Square Waveform
* Waveform Parameter Setting Through Numeric Keypad Entry & Knob Selection
* Amplitude, DC Offset and Other Key Setting Information Shown on the 3.5” LCD Screen Simultaneously
* AM/FM/FSK Modulation, Sweep, and Frequency Counter Functions (AFG-2100 only)
* USB Device Interface for Remote Control and Waveform Editing
The user friendly interface of AFG-2100/2000 Series allows user to set waveform parameters, including waveform type, frequency, amplitude, DC offset, modulation type, and duty cycle, through keypad entry and/or the knob selection, and display the set parameters on the 3.5” LCD screen. The AFG-2100/2000 Series is equipped with a USB Device interface for remote control and waveform editing through a PC. A waveform editing software is provided to facilitate the waveform creation on the PC. After the waveform editing is done, the user is able to download the waveform data from PC to the AFG-2100/2000 Series for signal output.
The AFG-2100/2000 Series Arbitrary Function Generator is a DDS (Direct Digital Synthesized) based signal generator designed to accommodate the Educational and Basic Industrial requirements for an accurate and affordable signal source covering the output of Sine, Square (Pulse), Ramp (Triangle), Noise and Arbitrary waveforms. The 20M Sa/s sampling rate, 10 bit vertical resolution and 4k point memory of the AFG-2100/2000 Series provide user with a flexible environment for creating the specific waveform output as needed. The 0.1Hz resolution of Sine, Square and Triangle waveforms and the 1% ~ 99% adjustable duty cycle of Square (Pulse) waveform are the remarkable features to greatly extend its application range in various fields.