DPS8600-485 series power supplies support 485 communications with built-in "isolated 485 to TTL module".
- Based on the switching power supply technology of BUCK structure, the working frequency is up to 150KHz, and with the minimum differential voltage of 0.5V can still work stably
- Input DC voltage 10-75V, with an AC-DC (AC to DC) switching power supply or battery, you can combine them into a high-precision digital adjustable DC power supply or charger
- The output voltage is 0-60V digitally continuously adjustable, the minimum voltage resolution is 10mV, and the ripple is lower than 50mVpp
- The output current is divided into 0-5A/8A (minimum resolution 1mA), 2 different models, the current is digital and continuously adjustable
- Provide PC software and communication protocol to support secondary programming control
- The communication protocol is divided into a simple communication protocol and a MODBUS-RTU communication protocol, which can be freely selected in the machine menu
- It can set the power-on automatic output, with its own temperature-controlled fan, intelligently adjust the speed, and it can automatically stop output when over-temperature
- With quick discharge function, the voltage response speed is adjusted very fast
- Automatically save parameters when power is off, there are 10 groups of M0~M9 storage locations, which can be saved and recalled at any time
- The internal structure is simple, and it is divided into two parts: the main board and the display board. Removing the shell allows for easy integration into your own device
30V 5A Mobile Phone Repair DC Regulated Power Supply
Upholds high precision and great stability.
Values of voltage and current continuously are adjustable from zero to rated value.
Constant voltage and current are in automatic conversion; arbitrary point within the rage wil be made in determining the limits and conservation spot.
Voltage and current are displayed on digital LED at the same time.
Voltage can be adjusted between 0~60V, Current can be adjusted between 0~2A.
DC Power Supply is widely used in various environment such as institutions laboratories,automated test equipment, electronic test equipment, factory production line ect.
Input Supply Voltage:110V/220V±10% 50/60Hz
Rated output voltage:0~30V
Rated output current:0~5A
Voltage display resolution:0.1V
Current display resolution:0.01A
Voltage display accuracy:±1%±1 word
Current display accuracy:±1%±1 word
Voltage ripple noise:≤1mVRMS(RMS)
Current ripple noise:≤3mVRMS(RMS)
Display:Three half-LED display
The box size:35.5* 16.3 * 19cm
A carton weight:29.5kg
Fitting:A manual, 220v power cord