8560EC spectrum analyzer 30 HZ-2.9 GHZ
Fast digital resolution bandwidths of 1 Hz to 3 MHz
Portable, MIL-PRF-28800, Class 3 rugged
Easily transfer screen image or trace data to PC with BenchLink software
Packaging & Shipping
Pack the instrument with PE bubble bag
Foam-in-place to protect the instrument
Fasten the carton with Belt
Pack the carton with PE film to waterproof
All values are in USD and do not include the customs duties & taxes and other surcharges.
The instrument will ship out within 5 days upon payment received.
We usually choose FedEx/DHL International Economy. Other shipment way is also acceptable
30days warranty, No ROR
During the warranty date, the buyer can return the item if have quality problem.
If you want to return the instruments, the return item has to be the original packing. Without my permission, the instrument cannot be dismantled.
You are responsible for returning the item and paying for return shipping. The payment for the freight cost will not return. Only payment for the instrument will be refund.
The refund will complete within 7 working days after we receive the return items
Signal reconstruction method adopted by oscilloscope
How to calculate the sampling rate? The calculation method depends on the waveform type measured and the signal reconstruction method adopted by oscilloscope, such as example sinusoidal insertion method, vector insertion method, etc. To reproduce the signal accurately and avoid confusion, the Nyquist theorem states that the sampling rate of the signal must be no less than twice its highest frequency component. However, the premise of this theorem is based on signals of infinite length of time and continuous period. Since oscilloscopes cannot provide a record length of infinite time, and low-frequency disturbances are by definition discontinuous and not periodic, sampling rates of twice the highest frequency components are usually insufficient.
In fact, the accurate reproduction of the signal depends on its sampling rate and the interpolation method of signal sampling point gap, namely waveform reconstruction.Some oscilloscopes provide the operator with the following options: sinusoidal interpolation for measuring sinusoidal signals, and linear interpolation for measuring rectangular waves, pulses, and other signal types.
A useful rule of thumb for comparing sample rates and signal bandwidths: if the oscilloscope you are looking at has interpolation (filtered to regenerate between sample points), the ratio (sample rate/signal bandwidths) should be at least 4∶1.Without sine interpolation, the ratio of 10∶1 should be adopted.
Advantages and disadvantages of using digital oscilloscope