Measuring Range: 5 - 600m/800m/1500m
Measuring Accuracy: ±0.1m
Measuring Unit: m
Angle Range: -90°~90°
Angle Measurement Error: ±0.35°
Field of View: 7°
Objective Lens Aperture: 25mm
Diopter Adjustment: Yes
Focusing Method: Eyepiece Focusing
Power Supply: 1 * CR2 3V Batteries(not included)
Net Weight: 200g
We support wholesale,please contact us if you need to import with mass quantity
Laser range finder manufacturers tell you about problems with range finders
Now using a laser rangefinder could easily measure distance, don't need you to take circle feet to calculate, we measured the distance is a good helper, henan zhengzhou manufacturer of laser rangefinder remind laser rangefinder various brand can according to your budget and actual use, to determine the laser range finder, domestic price cheap, but the performance stability is poorer than a imports, imports of laser range finder are relatively mature, but the price is much higher than domestic, and after a domestic is complicated. So what problems do we encounter in using laser rangefinder? Zhengzhou Defy laser rangefinder manufacturer listed several common problems.
What is the principle of using infrared ranging or laser ranging?
The ranging principle can be basically reduced to measuring the time required for light to travel to and from the target, and then calculate the distance D through the light speed c =299792458m/s and atmospheric refraction coefficient n.Because it is difficult to measure time directly, the phase of continuous wave is usually measured.Of course, there are impulse rangefinders, typically the WILD di-3000.It should be noted that phase measurement is not to measure the infrared or laser phase, but measure the modulation of the signal phase above the infrared or laser.The construction industry has a hand-held laser rangefinder for measuring houses that works in the same way.
Must the plane of the object be perpendicular to the light ray?
Usually precise ranging needs total reflection prism, and the house measurement of the rangefinder, the direct reflection of the wall to measure, mainly because the distance is relatively close, light reflected back the signal strength is large enough.With this you can know, must be vertical, otherwise the return signal is too weak to get the exact distance.
Is it ok if the measured object plane is diffuse reflection?
It is usually possible to use thin plastic sheets as reflective surfaces in practical projects to solve the serious problem of diffuse reflection.
Ultrasonic ranging and laser ranging differences?
Ultrasonic ranging accuracy is relatively low, now rarely used.The accuracy of laser rangefinder can reach 1 mm, suitable for all kinds of high precision measurement purposes.
What are the different classifications of laser ranging sensors?
There are two types of laser ranging sensors: triangulation and time-of-flight.There are three types of time-of-flight laser ranging: pulsed laser ranging, phase-based laser ranging and interferometry laser ranging.
Pulsed laser rangefinder technology takes advantage of the fact that the laser pulse energy is relatively concentrated in time and the instantaneous power is very large (usually up to watts). In the case of cooperative targets, pulsed laser ranging can achieve edge measurements, and universal pulsed laser ranging sensors can measure distances of tens or even tens of thousands of kilometers, achieving accuracy of more than 10 centimeters. When performing a range from a few kilometers to dozens of kilometers, the distance measurement can be performed only by diffusing the signal to the pulse tube using the measured target, even if no cooperative target is used.The disadvantage is that the absolute ranging accuracy is not very high.
The phase laser ranging sensor USES the high frequency sinusoidal signal of fixed frequency to continuously modulate the luminous intensity of the laser source and measure the phase delay generated by the modulating laser back and forth once.The measured distance is calculated by phase delay.
Phase-based ranging measures the time of signal propagation indirectly by measuring the phase delay of the continuous amplitude modulated signal propagating back and forth over the distance to be measured so as to obtain the measured distance.The method has high measurement accuracy, usually at the millimeter scale.
The interferometric ranging method is also a phase ranging method, which is different from the general phase ranging method in that it does not measure the distance by measuring the phase of the laser modulated signal, but by measuring the distance by measuring the change of the interference fringe.