DS2900 60MHz digital control dual channel DDS function Arbitrary waveform signal generator
DS2900 digital control dual channel DDS function Arbitrary waveform signal generator, with a small size, easy to carry, good stability and other characteristics, the two channels are completely independent, all parameters can be achieved at the same time; can output function signal, pulse signal, Signals, digital signals and custom arbitrary waveform signals, and has a counter and measurement signal function; the use of large-scale FPGA integrated circuits, high-speed MCU microprocessors and high-precision oscillator as the basis of internal circuits, the signal more stable. SMT technology can greatly improve the anti-interference and life of the instrument; electronic engineers, electronic laboratories, research institutes and electronic enthusiasts worthy of the equipment.
1,Adopt 320*240 2.4" TFT color LCD display, simultaneously display parameters of CH1 and CH2,Ability to reproduce patterns of custom waveform.
2,Using DDS direct digital synthesis technology to generate precise, stable and low distortion output signal.
3,Max. output frequency(sine wave) up to 15MHz/30MHz/40MHz/50MHz/60MHz(optional), 266MSa/s sampling rate and 14bits vertical resolution.
4,Completely independent dual channels output, synchronizing operation and adjustable phase difference.
5,Great improvement for square wave performance, square frequency range up to15MHzwith no distortion.
6,60 groups of arbitrary wave storage function, memory depth of each group is2048*14bits.
7,High frequency accuracy and resolution: frequency accuracy up to 10^(-6) magnitude, total range frequency resolution is 0.01uHz.
8,High amplitude resolution: the minimum amplitude resolution can reach 1mV, amplitude range is 0Vpp~20Vpp.
9,Duty-cycle of each channel can be adjusted independently0.1%-99.9%, the adjusting resolution is 0.1%.
10,Pulse pulse width and pulse cycle time is precisely adjustable, adjust the range of 30nS-4000S
11,Scanning features: linear sweep and logarithmic sweep functions; 0.1s-999.9s sweep time; sorward, backward and roundtrip sweep directions.
12,With pulse trains burst output function, allow the unit output 1~1048575 arbitrary pulse trains.
13,Measurement functions: can measure signal frequency, cycle, positive/negative pulse width and duty cycle; 1Hz~100MHz frequency range.
14,-9.99V~9.99V DC offset range, offset resolution: 0.01V.
15,With digital signal output function, CMOS output range 0~10V.
16,Storage feature: can store 100 groups of parameters set by the user and extract at any time.
17,Counter function: with DC and AC coupling modes.
18,Arbitrary wave editing function: user can edit arbitrary wave on PC and then download to
output from the instrument.
19,Communication function: the PC can be used to control the instrument.
20,With output short-circuit protection: all signal output can work 60s under load short-circuit condition.
1 * DDS Signal Source Generator
1 * USB Cable
1 * CD User Manual
1 * Power Adapter
2 * BNC Clips Cable
1 * Dual BNC Straight Line
High frequency precision up to 10-6 orders of magnitude.
Full range of 0.01μHz frequency resolution.
Minimum amplitude resolution can be up to 1mV.
Amplitude range is 0Vpp~20Vpp.
Duty cycle of each channel can be adjusted separately. Precision can be 0.1%.
Sine & Square & Triangle Wave: 0~15MHz/30MHz/60MHz(Optional)
Pulse & Arbitrary & TTL Digital Signal Wave: 0~6MHz
Square Rise Time: ≤25nS/≤20nS/≤15nS
Pulse Width Adjustment Range: 150nS-4000S/60nS-4000S/30nS-4000S
With pulse trains burst output function, allow the unit output 1~1048575 arbitrary pulse trains.
Frequency Accuracy: ±20ppm
Frequency Stability: ±1ppm/3h
China function generator 2mhz signal generator good for lab testing
2mhz Signal generator function generator
Frequency of the mode: 0.1Hz---2MHz/ 5MHz/ 10MHz/15MHz
Output waveform: Sine, Triangle, Square, ramp ±Pulse
TTL/CMOS and OUTPUT synchronous output
Less than 1% distortion at 10Hz-- 100 KHz
Output waveforms :Sine, triangle,square, positive and negative pulse, positive and negative ramp
Output impedance :50ohm±10%
Amplitude :Not less than 50Vp-p (open circuit)
DC voltage:0~±10V continuously adjustable
Rising edge of square :
Less than 100ns 0.1Hz---2MHz
Less than 50ns 0.1Hz---5MHz
Less than 35ns 0.1Hz---10MHz
Less than 35ns 0.1Hz---15MHZ
Distortion :Less than 1% at 10H-100KHz
Frequency response:0.1Hz~100MHz: ≤± 0.5dB
100 KHz-5MHz ≤±1dB (LW-1642)
100KHz~2MHz: ≤±1dB (LW1641)
Level Level: TTL low level less than 0.4V in pulse wave, high level less than 3.5V,CMOS low less tan 0.5V in pulse wave, high level 5V--14V continuously variable.
Rising time:Less than 100ns
Output voltage: -5V~0V±10
Input impedance:Not less than 1Mohm/20F
Line power:Less than 0.003%±1 digit
Weight N.W.: About 2.5Kg
G-52 5MHz Signal Function Generator
Function Generator 5MHz
Frequence Range : 0.5Hz to 5MHz in 8 Range
Waveforms: 4 Waveforms(Sins, Square, Triangle, DC)
Amplftude : 20Vp-p / Open, 10Vp-p / 50 Ohm Load
Attenuator : X20 (-26dB) +/- 2%, X1 (0dB)
Output Impedance : 50 Ohm (+/- 2%)
DC Offect: +/- 10V With Pull ADJ Switch
Freq Accuracy : +/- 0.02% + ID
Distortion : <1%, 1Hz to 100KHz
Rise / Fall Time: <90ns
V.C.F Input: 0 to +/- 10V control frequency to 1000:1
Rise time :<60ns
Level: >3Vp-p (open)
Wavefrom : Square, pluse
MODE : Linear / Log Sweep
Width : >100:1 continuously variable
Rate : From 10mS to 5S continuously variable
Sweekp Output :10Vp-p (open)
Output Impedance: 1K Ohm +/- 2%
Desplay: 5digits 0.36" Red LED desplay with Autorange
Gate time: Auto Select (0.25S~10S)
MODE: INT / EXT HF / EXT LF (100KHz Filter)
Accuracy: +/- Time Base Accuracy +/- 1count
Time Base: 20MHz +/- 20PPM (23+/- 5 deg C)
Frequence Range: 0.2Hz~60MHZ
Sensitivity: 25m Vrms at 1MHz
Max Input: 150Vrms
Input Impedance: 1M Ohm +/- 2%
AC Power : AC115V/230V +/- 10%, 50/60Hz, 25watt
Dimensions: 275(W) X 90(H) X 300(D) mm