Inspecting Package Contents
When you get a new DS6600 series dual channel DDS signal generator, please inspect device as follows:
1.1 Inspect the shipping container for damage.
If there are damages in the container or foam, keep them until the whole machine and the accessories passing the electrical and mechanical tests. If your instrument has damaged during shipping, please contact your seller and us for compensation.
Sine frequency range
Square frequency range
- Dual-channel function signal generator from this series is a multi-functional signal generator with high precision and high performance. It adopts large scale of FPGA integrated circuits, high-speed MCU microprocessor and with high precision oscillator as base in the inner circuit, which make the signals more stable.
- SMT process can greatly improve the anti-interference and lifetime of the signal generator. It has entirely independent dual-channel DDS signal and TTL level output, can generate signals of sine/triangle/square/sawtooth/pulse wave, white noise, etc.
- This signal generator is of perfect combination for high usability, excellent technical parameters and multiple functions in generating signal, scanning waveform, measuring parameters and use aspects. It's a great testing or measuring instrument for electronics engineers, electronic laboratory, teaching and researching.
- .Adopt 320*240 2.4" TFT color LCD display, simultaneously display parameters of CH1 and CH2,Ability to reproduce patterns of custom waveform.
- .Use soft silicone keys instead of traditional patch keys, high sensitivity and convenient for operation.
- .Using DDS direct digital synthesis technology to generate precise, stable and low distortion output signal.
- .Max. output frequency(sine wave) up to 15MHz/30MHz/40MHz/50MHz(optional), 200MSa/s sampling rate and 14bits vertical resolution.
- .Completely independent dual channels output, synchronizing operation and adjustable phase difference.
- 6.Great improvement for square wave performance, square frequency range up to15MHzwith no distortion.
- .60 groups of arbitrary wave storage function, memory depth of each group is 2048*14bits.
- .High frequency accuracy and resolution: frequency accuracy up to 10^(-6) magnitude, total range frequency resolution is 0.01uHz.
- .High amplitude resolution: the minimum amplitude resolution can reach 1mV, amplitude range is 0Vpp~20Vpp.
- .Duty-cycle of each channel can be adjusted independently0.1%-99.9%, the adjusting resolution is 0.1%.
- 11.Pulse pulse width and pulse cycle time is precisely adjustable, adjust the range of 30nS-4000S
- Scanning features: linear sweep and logarithmic sweep functions; 0.1s-999.9s sweep time; sorward, backward and roundtrip sweep directions.
- .With pulse trains burst output function, allow the unit output 1~1048575 arbitrary pulse trains.
- Measurement functions: can measure signal frequency, cycle, positive/negative pulse width and duty cycle; 1Hz~100MHz frequency range.
- -99V~9.99V DC offset range, offset resolution: 0.01V.
- With digital signal output function, CMOS output range 0~10V.
- Storage feature: can store 100 groups of parameters set by the user and extract at any time.
- Counter function: with DC and AC coupling modes.
- Arbitrary wave editing function: user can editDS6600-15M
Sine frequency range:0~15MHz
Square frequency range:0~15MHz
Triangle frequency range:0~15MHz
Pulse frequency range:0~6MHz
TTL digital frequency range:0~6MHz
Arbitrary wave frequency range:0~6MHz
Square rise time:≤25nS
Pulse width adjustment range:150nS-4000S
Mininum Frequency resolution:0.01µHz (0.00000001Hz)
Frequency accuracy: ±20ppm
Delivery of DS6600 DDS Signal generator
Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
China function generator 2mhz signal generator good for lab testing
2mhz Signal generator function generator
Frequency of the mode: 0.1Hz---2MHz/ 5MHz/ 10MHz/15MHz
Output waveform: Sine, Triangle, Square, ramp ±Pulse
TTL/CMOS and OUTPUT synchronous output
Less than 1% distortion at 10Hz-- 100 KHz
Output waveforms :Sine, triangle,square, positive and negative pulse, positive and negative ramp
Output impedance :50ohm±10%
Amplitude :Not less than 50Vp-p (open circuit)
DC voltage:0~±10V continuously adjustable
Rising edge of square :
Less than 100ns 0.1Hz---2MHz
Less than 50ns 0.1Hz---5MHz
Less than 35ns 0.1Hz---10MHz
Less than 35ns 0.1Hz---15MHZ
Distortion :Less than 1% at 10H-100KHz
Frequency response:0.1Hz~100MHz: ≤± 0.5dB
100 KHz-5MHz ≤±1dB (LW-1642)
100KHz~2MHz: ≤±1dB (LW1641)
Level Level: TTL low level less than 0.4V in pulse wave, high level less than 3.5V,CMOS low less tan 0.5V in pulse wave, high level 5V--14V continuously variable.
Rising time:Less than 100ns
Output voltage: -5V~0V±10
Input impedance:Not less than 1Mohm/20F
Line power:Less than 0.003%±1 digit
Weight N.W.: About 2.5Kg
1212BL sweep generator 20w sweep signal generator
sweep signal generator
Name:Audio Sweep Signal Generator
* With novel RC oscillation technique, sine wave distortion is small, especially suitable for pure tone audiometry speaker
*The frequency display, the output amplitude adopts digital display, more accurate readings, the error is smaller
*The frequency sweep starting point, end point can adjust the output power is big, the biggest can reach 150 W
*Sine wave distortion>0.8%
*Working mode:Manual and automatic logarithmic frequency sweep
*Frequency sweep time:1S-20s continuously adjustable
*Frequency sweep width More than1:1000
*Sine wave output amplitude:0-12.8rms 8Ωload,0-18rms 8Ωload,0-22rms 8Ωload,0-28.5rms 8Ωlosad
*Input voltage:AC220V/110V±10% 50HZ/60Hz