Inspecting Package Contents
When you get a new DS6600 series dual channel DDS signal generator, please inspect device as follows:
1.1 Inspect the shipping container for damage.
If there are damages in the container or foam, keep them until the whole machine and the accessories passing the electrical and mechanical tests. If your instrument has damaged during shipping, please contact your seller and us for compensation.
Sine frequency range
Square frequency range
- Dual-channel function signal generator from this series is a multi-functional signal generator with high precision and high performance. It adopts large scale of FPGA integrated circuits, high-speed MCU microprocessor and with high precision oscillator as base in the inner circuit, which make the signals more stable.
- SMT process can greatly improve the anti-interference and lifetime of the signal generator. It has entirely independent dual-channel DDS signal and TTL level output, can generate signals of sine/triangle/square/sawtooth/pulse wave, white noise, etc.
- This signal generator is of perfect combination for high usability, excellent technical parameters and multiple functions in generating signal, scanning waveform, measuring parameters and use aspects. It's a great testing or measuring instrument for electronics engineers, electronic laboratory, teaching and researching.
- .Adopt 320*240 2.4" TFT color LCD display, simultaneously display parameters of CH1 and CH2,Ability to reproduce patterns of custom waveform.
- .Use soft silicone keys instead of traditional patch keys, high sensitivity and convenient for operation.
- .Using DDS direct digital synthesis technology to generate precise, stable and low distortion output signal.
- .Max. output frequency(sine wave) up to 15MHz/30MHz/40MHz/50MHz(optional), 200MSa/s sampling rate and 14bits vertical resolution.
- .Completely independent dual channels output, synchronizing operation and adjustable phase difference.
- 6.Great improvement for square wave performance, square frequency range up to15MHzwith no distortion.
- .60 groups of arbitrary wave storage function, memory depth of each group is 2048*14bits.
- .High frequency accuracy and resolution: frequency accuracy up to 10^(-6) magnitude, total range frequency resolution is 0.01uHz.
- .High amplitude resolution: the minimum amplitude resolution can reach 1mV, amplitude range is 0Vpp~20Vpp.
- .Duty-cycle of each channel can be adjusted independently0.1%-99.9%, the adjusting resolution is 0.1%.
- 11.Pulse pulse width and pulse cycle time is precisely adjustable, adjust the range of 30nS-4000S
- Scanning features: linear sweep and logarithmic sweep functions; 0.1s-999.9s sweep time; sorward, backward and roundtrip sweep directions.
- .With pulse trains burst output function, allow the unit output 1~1048575 arbitrary pulse trains.
- Measurement functions: can measure signal frequency, cycle, positive/negative pulse width and duty cycle; 1Hz~100MHz frequency range.
- -99V~9.99V DC offset range, offset resolution: 0.01V.
- With digital signal output function, CMOS output range 0~10V.
- Storage feature: can store 100 groups of parameters set by the user and extract at any time.
- Counter function: with DC and AC coupling modes.
- Arbitrary wave editing function: user can editDS6600-15M
Sine frequency range:0~15MHz
Square frequency range:0~15MHz
Triangle frequency range:0~15MHz
Pulse frequency range:0~6MHz
TTL digital frequency range:0~6MHz
Arbitrary wave frequency range:0~6MHz
Square rise time:≤25nS
Pulse width adjustment range:150nS-4000S
Mininum Frequency resolution:0.01µHz (0.00000001Hz)
Frequency accuracy: ±20ppm
Delivery of DS6600 DDS Signal generator
Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
3010 DDS signal generator 10MHz high performance factory price function generator
Direct Digital Synthesis(DDS) technology,2 independent output channels 3.5-inch TFT display;
32 kinds of standard or built-in fixed waveforms ;
Minimum stable output waveform: 1mV(50Ω) ;
Multiple modulation functions: FM,FSK,ASK,PSK;
Frequency sweep,amplitude sweep and burst functions ;
Overvoltage, overcurrent,output short-circuit and reverse voltage protections;
Optional parts:RS232 interface,frequency counter,power amplifier ;
MODEL (TFT display)
Output Characteristics of Channel A
Waveform type: 32 waveforms including: Sine, Square, Triangle, Ramp, Pulse etc. ;
Waveform length: 1024 points ; Sample rate: 100MSa/s;
Waveform amplitude resolution: 8bits;
Sinusoidal harmonic rejection: ≥40dBc (<1MHz), ≥35dBc (1MHz~20MHz);
Sine wave total distortion: ≤1% (20Hz~200kHz);
Square rise/fall edge time: ≤35ns ; Overshoot: ≤10%;
Square wave duty cycle: 1%~99%;
Frequency range: Sine: 40mHz~Max. frequency (MHz); Other waveforms: 40mHz~1MHz;
Frequency resolution: 40mHz;
Frequency accuracy: ±(5×10-5+40mHz);
Frequency stability: ±5×10-6/3 hours;
Amplitude range: 2mVpp~20Vpp 40mHz~10MHz (high impedance)
2mVpp~15Vpp 10MHz~15MHz (high impedance)
2mVpp~8Vpp 15MHz~20MHz (high impedance)
Resolution: 20mVpp (amplitude>2Vpp), 2mVpp (amplitude<2Vpp)
Amplitude accuracy: ±(1%+2mVrms) (high impedance, true RMS, frequency at 1kHz)
Amplitude stability: ±0.5%/3 hours
Amplitude flatness: ±5% (frequency<10MHz), ±10% (frequency >10MHz)
Output impedance: 50Ω
DC Offset Characteristics
Offset range: ±10V (high impedance,attenuation 0dB) Resolution: 20mVdc
Offset accuracy: ±(1%+20mVdc)
Linear sweep on frequency or amplitude.;
Sweep range: free to set start point and stop point. ;
Sweep step: higher than any figure of resolution.;
Sweep rate: 10ms~60s/step;
Sweep mode: UP, DOWN, UP-DOWN;
Manual sweep: step/time;
Frequency Modulation Characteristics
Carrier signal: channel A signal ;
Modulation signal: internal signal of channel B or external signal;
FM deviation: 0%~20%;
Shift Keying Characteristics
FSK: free to set carrier frequency and hop frequency;
ASK: free to set carrier amplitude and hop amplitude
PSK: hop phase 0~360°, Max. resolution 1°;
Alternative rate: 10ms~60;
Carrier signal: channel A signal;
Trigger signal: TTL_A signal;
Burst count: 1~65000 cycles;
Burst mode: Internal TTL, External, Single;
Output Characteristics of Channel B
Waveform type: 32 waveforms including: Sine, Square, Triangle, Ramp, Pulse etc.;
Waveform length: 1024 points ; Sample rate: 12.5MSa/s;
Waveform amplitude resolution: 8bits
Square duty cycle: 1%~99%;
Frequency range: Sine: 10mHz~1MHz ; Other waveforms: 10mHz~100kHz;
Frequency resolution: 10mHz;
Frequency accuracy: ±(1×10-5+10mHz);
Amplitude range: 50mVpp~20Vpp (high impedance) ; Resolution: 20mVpp;
Output impedance: 50Ω;
Carrier single: channel B signal
Trigger signal: TTL_B signal
Burst count: 1~65000 cycles
Burst mode: Internal TTL, External, Single
TTL Output Characteristics
Waveform Characteristics: Square, rise/fall time≤20ns
Frequency Characteristics: 40mHz~1MHz
Amplitude Characteristics: TTL, CMOS compatible, low<0.3V, high>4V
Input Voltage: AC220V (1±10%)
AC110V (1±10%) (Pay attention to the voltage selection on rear panel)
Frequency: 50Hz (1±5%)
Temperature: 0~40℃ Humidity: <80%
Keypad operation and rotary knob operation
3.5-inch TFT display
English, Chinese (simplified), Chinese (traditional)
Dimension and Weight
Size:415mmx295mmx195mm Weight: 3.5kg
Surface Mount Technology, Integrated Circuit. High reliability and stability.
Optional Parts Characteristics
Testing frequency range: 1Hz~150MHz
Input signal amplitude: 100mVpp~20Vpp
Max.output power: 7W (8Ω), 1W (50Ω)
Max.output voltage: 22Vpp
Frequency bandwidth: 1Hz~200kHz
Digital Dual channel DDS Function Signal Generator MHS-2300A 5MHZ
Introduction of the instrument
The instrument uses a large-scale high-speed FPGA + ARM microprocessor, display with 2.4-inch TFT color LCD display. The instrument has dual DDS signal output waveform output has sine, square, triangle, pulse, linear frequency sweep, logarithmic frequency scanning signal generating function, and can achieve arbitrary waveform generation function of the signal, the highest frequency sinusoidal signal to 5MHz, frequency resolution up 10uHz. In addition TTL sync input waveform output and SYNC is the same terminal, take advantage of this feature allows multiple signal generator phase synchronization, enabling multi-channel signal generator functions. Measurement, the instrument has a frequency measurement, period measurement, positive pulse, negative pulse width measurement and counting functions. This instrument is an electronics engineer, electronics laboratories, production lines and teaching, research and the ideal test, measurement equipment.
The main features:
1 direct digital synthesis (DDS) technology , FPGA design , ultra-low power consumption ;
2 uses a single 5V power adapter , if the user has moved the power , but also to facilitate the achievement of field work ;
3 sine wave signal output frequency is 10uHz ~ 5MHz;
4 square wave, pulse wave , triangle wave output frequency is 10uHz ~ 1MHz;
5 contains an internal precision attenuator circuit, the small-signal output is more accurate ;
6 waveform frequency resolution up to 10uHz;
7 with an arbitrary starting point, the end of the frequency setting , linear and logarithmic sweep sweep function ;
8 has a frequency measurement, period measurement , pulse width measurement and counting positive and negative features ;
9 has a control function of the number of output pulses can be controlled by the output pulses of 1 to 1,048,575 according to the setting function
10 All parametric equalizer can be done by an internal calibration procedure ;
11 interface using interactive menus , support Chinese and English language options , allowing users a glance ;
12 chassis compact shape, easy to carry , comfortable and flexible key operation .
13 can communicate with the PC , use the PC to control the instrument , and the ability to edit arbitrary waveforms on a PC to download to the instrument output waveform.