How to place the order of DS6600 series DDS Signal generator?
WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
6. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
DS6600 series DDS signal generator can generate sine wave, square wave, triangle wave, pulse wave, and arbitrary wave etc. The frequence will be upto 40MHz. And it has duty-cycle correction, amplitude modulation function and frequency sweep function, etc. it can show output signal, amplitude and frequency in the same time. This series has amplitude frequency characteristics, and the appearance is very delicate and beautiful. It can be applied in factories, schools, research institutes and laboratory
What is your delivery time of your DDS Signal generator?
A: Mass Production For Wholesale Order: Normally it's 15 ~ 30 Days. During the busy months it will be 45 Days.
B: Small Order normally in 7 days after payment.
Please check with us if order is confirmed.
5200A 25MHZ Dual-Channel Digital Signal Generator DDS Function Generator Arbitrary Waveform/Pulse Frequency Generator
The LCD display is divided into two lines: the top line shows the current frequency and the following line displays additional parameters or functions.
This instrument is of great advantage in generating signal, scanning waveform, measuring parameters, etc.
It's a great testing or measuring instrument for electronics engineer, electronic laboratory, teaching and researching.
Has a frequency measurement, period measurement, positive and negative pulse width measurement, duty cycle measurements and counting function.
With USB interface, after the connection with PC, the PC can be used to control the instrument.
Can output arbitrary waveforms and conventional function waveforms(sine/triangle/square/sawtooth wave and TTL signal).
All functions are digitally controlled, precise and stable.
Dual-channel output, can work in sync, phase difference is adjustable.
Sine Wave: 0Hz~25MHz.
Square Wave/Triangle Wave/Sawtooth Wave/Arbitrary Waveform/TTL Digital Signal Wave: 0Hz~6MHz.
Waveform Types: Sine/Triangle/Square/Lifting Sawtooth Wave, CMOS Digital Signal Wave and Arbitrary Waveform.
Waveform Length: 2048Points.
Sampling Rate: 200MSa/s.
Waveform Amplitude Resolution: 12 Bits.
The Min. Frequency Resolution: 10mHz.
Frequency Error: +/-5*10^(-6).
Frequency Stability: +/-1*10^(-6)/5 hours.
Amplitude Range(Peak to Peak): 5mVp-p~20Vp-p.
Output Impedance: 50Ω(+/-10%).
Amplitude Resolution: 1mVp-p (-20dB Attenuation); 10mVp-p (No Attenuation).
Offset Range: -120%~120% (The ratio of bias voltage and signal amplitude).
Bias Resolution: 1%.
Phase Range: 0~359°.
Phase Resolution: 1°.
Sine Wave Harmonic Arrived System: 40dBc(<1MHz); 35dBc(1MHz~20MHz).
Sine Wave Distortion: <0.8%(20Hz~20KHz).
Lifting Along Time: ≤20ns.
Duty Cycle Adjustment Range: 0.1%~99.9%.
Level Amplitude: >3Vpp.
Fan-out: >20 TTL Load.
Rise/Fall Time: ≤20ns.
Output Low Level: <0.3V.
High Level: 1V~10V.
Level Rise/Down Time: ≤20ns.
Waveform Quantity: 16.
Memory Depth/Group: 1KB/16.
Frequency Measuring Range: GATE-TIME=10S 0.1Hz - 60MHz; GATE-TIME=1S 1Hz - 60MHz; GATE-TIME=0.1S 10Hz - 60MHz; GATE-TIME=0.01S 100Hz - 60MHz.
Input Voltage Range: 0.5Vp-p~20Vp-p.
Counting Range: 0~4294967295.
Positive and Negative Pulse Width Measurement: 10ns Resolution, the Max. Measurable 10s.
Periodic Measurement: 20ns Resolution, the Max. Measurable 20s.
Duty Cycle Measurement: 0.1% Resolution, Measuring Range from 0.1%~99.9%.
Source Selection: 1. Ext. IN Input(AC Signal) ; 2. TTL-IN Input(Digital Signal).
Interface Mode: Using USB to Serial Interface.
Communication Rate: 57600bps.
Protocol: Using the Command Line, the Agreement Public.
Power Supply: US Plug / EU Plug (Optional); Type: DC12V±0.5V..
AM/FM Signal Generator with Frequency Counter ATFB20B+ DDS FUNCTION GENERATOR 20MHZ 100MSa/s110-220V
AM/FM Signal Generator with Frequency Counter ATFB20B+ DDS FUNCTION GENERATOR 20MHZ 100MSa/s110-220V+